arp/mac cache limits - any plans to increase them?

cancel
Showing results for 
Search instead for 
Did you mean: 

arp/mac cache limits - any plans to increase them?

L4 Transporter

Palo Alto seem to have the lowest arp/mac cache limits of any firewall I've ever come across.

Are there any plans to increase the limits please?

3 REPLIES 3

L4 Transporter

Out of curiosity, what are the limits and how do you know if you approach them, etc.

Thanks

Bob

You can get the max number of arp entries supported on a platform using the following command:

show system state filter cfg.general.max*

Here is a sample output for 200:

admin@lab108-PA-200(active)> show system state filter cfg.general.max*
cfg.general.max-address: 0x9c4

cfg.general.max-address-group: 0xfa

cfg.general.max-address-per-group: 0x1f4

cfg.general.max-appinfo2ip-entry: 500

cfg.general.max-arp: 0x1f4

cfg.general.max-blacklist: 0x61a8

You can also get this value from:

admin@lab108-PA-200(active)> show arp all
maximum of entries supported :      500

default timeout:                    1800 seconds

total ARP entries in table :        25

total ARP entries shown :           25

status: s - static, c - complete, e - expiring, i - incomplete

Hello,

You can also look at specsheets PDFs on PaloAlo home website, like this one: http://media.paloaltonetworks.com/documents/PA500_Specsheet.pdf

This is a very good limitation to know:  MAC table size/device: 500  for PA-500

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!