Assign a new QOS profile to just one tunnel on a tunnel interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Assign a new QOS profile to just one tunnel on a tunnel interface

L0 Member

Hi Guys,

 

I'm rather new to Palo and this community, so forgive me if I don't do this right.

 

We need to restrict the Egress Max of just one tunnel (out of 9) on a tunnel interface.

The config looks like this right now:

Capture.PNG

 

I would like to change just tunnel 9 to 1Mbps. How would I go about doing that?

 

Thanks in advance

Ronelle

 

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Create a new QoS profile under the 'Network' tab and modify your egress max and then assign it to the tunnel should do the trick. 

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Create a new QoS profile under the 'Network' tab and modify your egress max and then assign it to the tunnel should do the trick. 

  • 1 accepted solution
  • 1573 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!