- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
12-08-2016 07:02 AM
We have a need to limit download and upload to 50 Mb/50 Mb for a specific AD group in our company. I have followed the steps in this article
When I apply the qos profile to interfaces it then applies to 50 Mb limit to everyone in the zone even though I create the qos policy rule to apply to just a specifc group. I have not found articles to help.
thank for you time
12-08-2016 07:23 AM
It sounds like you are assigning the same class id that your traffic would natively be assigned coming from that zone.
As long as I have QoS right, and I may not, the QoS policy is essentially just dictating what class gets assigned to the traffic that matches that policy. If you havethe 50/50 limit applied to class 4 (the default) then the policy essentially doesn't make a difference since you already applied the rate limit to all of the traffic from your interface the same QoS policy.
The QoS profile that you make should specify a class that you are not already utilizing, then the QoS profile should be used to designate that all traffic from that AD group is going to be assigned the set class. The class identified needs to not match your normal traffic flow or be the default class, as then the QoS profile settings will be applied to all traffic.
12-08-2016 07:23 AM
It sounds like you are assigning the same class id that your traffic would natively be assigned coming from that zone.
As long as I have QoS right, and I may not, the QoS policy is essentially just dictating what class gets assigned to the traffic that matches that policy. If you havethe 50/50 limit applied to class 4 (the default) then the policy essentially doesn't make a difference since you already applied the rate limit to all of the traffic from your interface the same QoS policy.
The QoS profile that you make should specify a class that you are not already utilizing, then the QoS profile should be used to designate that all traffic from that AD group is going to be assigned the set class. The class identified needs to not match your normal traffic flow or be the default class, as then the QoS profile settings will be applied to all traffic.
12-08-2016 10:47 AM
Thanks that was it. I remove the egress garanteed and the egress max from Qos Profile and set the limits on class 7. I then changed the policy rule to match on the group with class 7. It works? Thanks again.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!