I have raised a TAC case regarding this but wanted to see if anyone had had a similar issue with a known fix?
We have a pair of Palo Alto's with PANOS 8.1.10 running in active-active configuration. Routing is configured using BGP. The active-secondary export is configured with an AS-Path Prepend of 3 for both peers (inside/outside) to make the route less attractive than the Active Primary. The Inside Path is fine showing AS-Path prepended, but the outside path is not showing AS-Path prepending. Not sure when this stopped but it is causing us some minor issues and increases latency by 5ms as some traffic is routing via active-secondary.
Has anyone seen this before or have any recommendations - disabling BGP and re-enabling BGP did not work neither did rebooting the active -secondary device.
Solved! Go to Solution.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!