Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-23-2020 05:13 AM
Hi
Has anyone setup a palo fw on a BT Net no router option (wires only) connecting directly to their network?
Thanks
10-23-2020 06:56 AM
if this config brings in ethernet directly from the ISP, you can set the firewall as a VWire directly between the ISP and your switch/AP
The default config of any hardware is still eth1/1 as outside (untrust), eth1/2 as inside (trust)
10-23-2020 06:56 AM
if this config brings in ethernet directly from the ISP, you can set the firewall as a VWire directly between the ISP and your switch/AP
The default config of any hardware is still eth1/1 as outside (untrust), eth1/2 as inside (trust)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
