Cannot retrieve indicators from FS-ISAC feed

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cannot retrieve indicators from FS-ISAC feed

L1 Bithead
I recently created a feed over at FS-ISAC for my organization, and I'm able to connect successfully from within MineMeld, however I am not receiving any indicators. My initial_interval is set to 30d and when I test using 'taxii-poll' from the shell I'm able to retrieve indicators that way, so I know the feed I'm publishing is working, but MineMeld shows 0 indicators. Any ideas where to look next? I've checked the engine logs and there are no errors, and the miner has zero logs.
1 accepted solution

Accepted Solutions

After turning on verbose logging, I was able to see what was happening when MineMeld retrieved my feed from FS-ISAC. Ultimately, I solved the problem by publishing a feed containing 'observables' and not just indicators.

View solution in original post

2 REPLIES 2

L1 Bithead

So, here's the configuration of my TaxiiClient prototype:

 

age_out:
    default: last_seen+30d
    sudden_death: false
attributes:
    confidence: 100
    share_level: green
client_cert_required: true
collection: <user.feed>
discovery_service: https://analysis.fsisac.com/taxii-discovery-service
initial_interval: 30d
source_name: fsisac.<user.feed>

 

I've tried this with both last_seen+30d and null, as well as varying initial_interval and setting the feed in FS-ISAC to only IP Watchlist and Indicators, just in case it was an issue parsing certain items, but it still retrieves 0 indicators.

After turning on verbose logging, I was able to see what was happening when MineMeld retrieved my feed from FS-ISAC. Ultimately, I solved the problem by publishing a feed containing 'observables' and not just indicators.

  • 1 accepted solution
  • 5301 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!