- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
09-25-2015 08:45 AM
Does anyone have experience setting up a Captive Portal over IPv6 ?
I found the detail the PAN firewall that have support for it, With IPv4 it's easy.
"IPv6 user information is captured from all of the User-ID-supported repositories and terminal services, as well from captive portal and our XML API."
https://www.paloaltonetworks.com/products/features/networking-ipv6.html
Thanks,
Tin
09-27-2015 01:16 AM
If you have existing configuration of captive portal for ipv4 then you donot have to do anything. Just make sure the IPV6 routing is perfect.
09-26-2015 04:26 PM
With IPV6 it works perfect.
Rate the helpful answer.
09-27-2015 12:30 AM
Hello pakumar,
Can setting up dual stack(IPv4+IPv6) captive portal in the same time?
Best regards,
Tin
09-27-2015 01:16 AM
If you have existing configuration of captive portal for ipv4 then you donot have to do anything. Just make sure the IPV6 routing is perfect.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!