06-03-2014 08:06 AM
Hello
Where I can change the time when a user enters for captive portal? Caduceus do not want the user session. I have a PA500 Software version 5.0.4
Thank you very much.
06-04-2014 11:20 AM
Device Tab
User Identification Menu
Captive Portal Settings sub tab
Idle Timer (min)
This is the user time to live (user TTL) setting for a captive portal session. This timer resets every time there is activity from a captive portal user. If the length of time the user is idle exceeds the idle timer, the captive portal user mapping will be removed and the user will have to log in again. (1-1440 minutes, default 15 minutes).
Expiration (min)
This is the maximum TTL, which is the maximum amount of time that any captive portal session can remain mapped. After the expiration duration has elapsed, the mapping will be removed and users will have to re-authenticate even if the session is active. This timer is used to ensure prevent stale mappings and the value set here overrides the idle timeout. Therefore, as a best practice, set the expiration to a value that is higher than the idle timer (range 1 - 1440 minutes; default 60 minute
06-04-2014 11:20 AM
Device Tab
User Identification Menu
Captive Portal Settings sub tab
Idle Timer (min)
This is the user time to live (user TTL) setting for a captive portal session. This timer resets every time there is activity from a captive portal user. If the length of time the user is idle exceeds the idle timer, the captive portal user mapping will be removed and the user will have to log in again. (1-1440 minutes, default 15 minutes).
Expiration (min)
This is the maximum TTL, which is the maximum amount of time that any captive portal session can remain mapped. After the expiration duration has elapsed, the mapping will be removed and users will have to re-authenticate even if the session is active. This timer is used to ensure prevent stale mappings and the value set here overrides the idle timeout. Therefore, as a best practice, set the expiration to a value that is higher than the idle timer (range 1 - 1440 minutes; default 60 minute
06-09-2014 06:23 AM
Thank you very much, jcostello
Regards 
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
