checking cpu utilization from last day

[MP18]

need to know if we caneck DP cpu utilization for certain time frame?

[BPry]

@MP18

From the CLI running the command 'show running resource-monitor' will allow you to select a certain amount of time periods. 

- day

- hour

- minute

- second

- week

which then can be broken down even further. 

bpry@LegTest(active)> show running resource-monitor hour last 2

Resource monitoring sampling data (per hour):

CPU load (%) during last 2 hours:
core 0 1 2 3 4 5 6 7
avg max avg max avg max avg max avg max avg max avg max avg max
* * 3 14 5 13 7 16 7 17 7 15 7 17 7 18
* * 3 9 5 12 8 17 7 22 7 18 7 17 8 19
core 8 9 10 11 12 13 14 15
avg max avg max avg max avg max avg max avg max avg max avg max
7 18 7 15 7 15 7 15 7 20 7 17 8 19 9 19
8 18 7 15 7 17 7 15 8 18 7 18 9 19 9 22
core 16 17 18 19 20 21 22 23
avg max avg max avg max avg max avg max avg max avg max avg max
8 19 8 19 8 17 8 17 7 19 9 18 8 17 9 19
8 22 9 20 9 19 9 20 8 19 9 19 9 19 9 19
core 24 25 26 27 28 29 30 31
avg max avg max avg max avg max avg max avg max avg max avg max
8 19 8 19 8 18 8 17 8 18 8 19 8 19 8 17
8 18 9 19 8 17 9 21 9 19 8 17 9 20 9 23
core 32 33 34 35 36 37 38 39
avg max avg max avg max avg max avg max avg max avg max avg max
8 21 8 18 8 18 9 19 7 16 8 18 8 19 5 15
9 22 9 24 9 19 9 19 8 17 9 17 9 18 6 14
core 40 41 42 43 44 45 46 47
avg max avg max avg max avg max avg max avg max avg max avg max
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *

Resource utilization (%) during last 2 hours:
session (average):
1 1
session (maximum):
1 1
packet buffer (average):
1 1
packet buffer (maximum):
3 4
packet descriptor (average):
0 0
packet descriptor (maximum):
1 1
packet descriptor (on-chip) (average):
2 2
packet descriptor (on-chip) (maximum):
21 25

[MP18]

which field we should look for high cpu?