Compatibility SFP for PA-5250

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Compatibility SFP for PA-5250

L1 Bithead

Hello,
Can you help me? I have an Avago AFBR-709SMZ SFP, in the documentation it says that it has withdrawn from the AVL. So, can I use them and it would not have problems in their operation?

 

https://live.paloaltonetworks.com/t5/operations-documentation/updated-on-02-09-2021-document-810-000...

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

@GariHiroshi 

 

I am using this SFP in 10Gig Single Mode with PA 5220 and bought this SFP from PA Vendor.

When i run show system state command as mentioned in earlier post it show up as Vendor is Avago.

No issues .

 

Regards

MP

Help the community: Like helpful comments and mark solutions.

View solution in original post

5 REPLIES 5

Cyber Elite
Cyber Elite

Hello,

While I do not know for certain. I would plug them in and see. Worst case support wont help if there are any issues.

 

Regards,

L3 Networker

Hi there,

@OtakarKlieradvice is a good litmus test, also consider checking the system state via the CLI to see if they are recognised on the current OS version:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000boFQCAY

 

cheers,

Seb.

Cyber Elite
Cyber Elite

@GariHiroshi 

 

I am using this SFP in 10Gig Single Mode with PA 5220 and bought this SFP from PA Vendor.

When i run show system state command as mentioned in earlier post it show up as Vendor is Avago.

No issues .

 

Regards

MP

Help the community: Like helpful comments and mark solutions.

L1 Bithead

Thanks to all,

 

The 3 opinions help me, while CLI with the command "show system state filter sys.sX.pY.phy" i see the transceiver that is connect in the PA5250. i let's the documents of PA support: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaMCAS

 

GariHiroshi_0-1616406818954.png

 

@MP18 i hope no problems more later. Thanks!!!

 

@GariHiroshi 

 

You should be fine.!

 

Regards

MP

Help the community: Like helpful comments and mark solutions.
  • 1 accepted solution
  • 4538 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!