Configuration Management

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Configuration Management

L4 Transporter

Hi,

I have a further question:

I don't understand the configuration management yet.

The option "Revert to last saved configuration", what does that mean?

When is a configuration saved? Every time I commit ? Or only manually?

 

Maybe I have done changes on the device and commit them. Then I check that something doesn't work anymore.

What can I do?

1 accepted solution

Accepted Solutions

The Revert to last saved config actually restores your .snapshot.xml config; while the Revert to running config brings back the running-config.xml configuration. 

Essentially unless you are saving canidate configurations then they aren't going to be any differences. If you are saving canidate configs then they will be your last saved config; where the running config will always be what was last actually commited. 

 

Hope that clears things up; but essentially unless your using canidates it really doesn't matter which one you click because you will always have the same thing as your last saved and your running config. 

View solution in original post

4 REPLIES 4

L6 Presenter

It's good, you are right!

 

But I still don't understand the difference between Revert to last saved configuration and Revert to running configuration....

 

In my opinion this is the same, because loading the running config is the same like loading the last saved config.

Because the last saved config (by a commit) = running config.

 

I can't see any difference.

 

When I save a NAMED config snapshot, this also isn't the last saved config when using Revert to last saved configuration, is it?

 

So when I accidently commit bad changes, I think the only way to undo this is to manually save a named config snapshot when the firewall is in a working state, then make changes and commit them. If it then turns out that something doesn't work anymore, I could load the named config snapshot which I manually saved before.

 

Am I right?

 

The Revert to last saved config actually restores your .snapshot.xml config; while the Revert to running config brings back the running-config.xml configuration. 

Essentially unless you are saving canidate configurations then they aren't going to be any differences. If you are saving canidate configs then they will be your last saved config; where the running config will always be what was last actually commited. 

 

Hope that clears things up; but essentially unless your using canidates it really doesn't matter which one you click because you will always have the same thing as your last saved and your running config. 

Yes, thanks!

  • 1 accepted solution
  • 2105 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!