Connections Per Second Per host?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Connections Per Second Per host?

L4 Transporter

Has anyone found a way to see a hosts generated connections per second? In other words we want to hone in on a specific host and see the CPS being generated in either a live or post event.

 

All I have found so far is global cps (show session info)

 

Thank you

1 REPLY 1

Cyber Elite
Cyber Elite

How about setting up a filter in the Packet Filter portion of the FW (not referring to the capture stages.... to be clear).

 

then you can do something like

 

expedition@PA-220> show counter global filter packet-filter yes
+ aspect Counter aspect
+ category Counter category
+ delta Difference from last read
+ severity Counter severity
+ value value
| Pipe through a command

And you can see whatever granular info you would like, because your filter is for the IP of the device in question... you can get cps then, (or similar) 

 

Please help out other users and “Accept as Solution” if a post helps solve your problem !
  • 3365 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!