How to create VLAN's in PaloAlto?
Created VLAN interface 1 (ip 10.10.10.1/24) and created the vlan "sales" for this VLAN interface.(configured zone, applied to default router)
Created VLAN interface 2 (ip 10.10.20.1/24) and created the vlan "Accounts" for this VLAN interface.(configured zone, applied to default router)
For above scenario which physical interface needs to connected to layer 2 switch and how to define that port as a trunk? what are the setting needs to be done for that physical interface?
I am totally confused,..kindly help me to understand this concept.
You have to first configure an interface or a sub interface as a layer 2 type
Then use this interface/ sub interface under the Vlan that you have configured.
When you configure multiple sub interfaces under the physical interface, it automatically becomes a trunk port, like shown below. Ensure that when connecting to a switch, the switch ports should be configured with the same vlans that have been configured on the sub interfaces on the PAN
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!