Crossover cables on PA-7050

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Crossover cables on PA-7050

L2 Linker

Hello,

 

I found that for HA1 when there are directly connected, Palo Alto recoments to have them interconected with crossover cables.

is this the same with PA-7050?

https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/high-availability/configure-active-p...

 

because at this point it's working with straight thru cables.

 

Could you please advise?

 

Thank you

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

It's always Best to follow what is recommended for the devices; however most common devices have the smarts to notice if you are using a crossover or a striaght thru and work accordingly. If you have tested your HA links and they are working I wouldn't worry to much about it. 

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

It's always Best to follow what is recommended for the devices; however most common devices have the smarts to notice if you are using a crossover or a striaght thru and work accordingly. If you have tested your HA links and they are working I wouldn't worry to much about it. 

  • 1 accepted solution
  • 1885 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!