there is a Day 1 configuration that can be generated from CSP. Here is the KB: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PM2lCAG ? Is it what you were looking for?
Thank you for reply @Sujanya
the link I shared is the only way I am aware of. I believe there is nothing else available from CSP. If you have a Panorama in your environment, you can leverage: "Auto Push on 1st Connect" to streamline onboarding of Firewalls. Other than this I can't think of anything else.
Thanks for the information. We have panorama in our environment and will further check on "Auto Push on 1st Connect" option available in Panorama.
Having one doubt on Day 1 configuration via CSP portal, Do we need to take the console of Palo-Alto and set-up the management interface to make it access via GUI and later we need to use this day1 config tool of PAN to create a baseline xml file of PAN configuration which can be loaded to firewall later.
Running Day1 config itself will set-up the management interface Ip(which we will providing during running the tool) and later it would be accessible via GUI. Later generated file can be imported.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!