Deploying VM-series from AWS Market place

[pink-panther]

I was wondering what typical diagram would look like for this deployment (youtube video of same name). If anybody has a network diagram for a setup/deployment I'd be grateful for it.

[SebRupik]

Hi there,

The topology is pretty simple, a mgmt0 interface (sn-mgmt), Eth1/1 (untrust) (sn-pub) and Eth1/2 (trust) (sn-priv).

The firewall is positioned between the two AWS routing tables which hold the subnets sn-pub and sn-priv. Traffic must pass through the vPA to route between the AWS route tables.

Oddly the sn-mgmt subnet is also in the same routing table as sn-pub (on the 'outside') which strikes me as a bad topology....but probably easier to manage for the benefit of the tutorial!

cheers,

Seb.

[pink-panther]

Hi would you happen to have a picture/diagram ?

[SebRupik]

Something like this:

cheers,

Seb.

[LAYER_8 · Accepted solution]

Check out our consulting engineering org's github repo. They built terraform templates of all the common deployments from our reference architecture guide. For example, here's an HA pair attached to a transit gateway peering with 4 other VPCs. 

You may be able to find the traditional 3 nic (1 mgt, 1 trust, 1 untrust) deployment model picture in a different directory. 

[pink-panther]

Thanks Seb.