Design active passive connected with vrrp switches

[K.Mohamed]

Design active passive connected with vrrp switches

for physical connection and AE i want to connect full mesh topology but want to confirm it's working like stack switches.

PA1 > (2 links sw1,sw2)

PA2 > (2 links sw1,sw2)

so for aggregation to i can assign port to the AE.

thanks. 

[Brandon_Wertz]

---

@K.Mohamed wrote:

Design active passive connected with vrrp switches

for physical connection and AE i want to connect full mesh topology but want to confirm it's working like stack switches.

PA1 > (2 links sw1,sw2)

PA2 > (2 links sw1,sw2)

so for aggregation to i can assign port to the AE.

thanks. 

---

Is there a question in this post?  It sounds like you're asking if you can create a port-channel (aggregate Ethernet) from an HA A/P pair firewall to a pair of switches.  Yes, you can.  It's done just as you described.

PA1 > (2 links sw1,sw2)

PA2 > (2 links sw1,sw2)