Destination NAT with different subnet of Outside interface.

cancel
Showing results for 
Search instead for 
Did you mean: 

Destination NAT with different subnet of Outside interface.

Not applicable

Hello,

Outside interface of Palo Alto firewall is configured with aaa.bbb.ccc.ddd /30 subnet.

I have some servers in DMZ those need to be accessed via internet with IP address(es)/subnet ZZZ.XXX.YYY.VVV/24.

I have configured Destination Nat( including Security Policy) for these servers with the IP addresses as mentioned above.

Please let me know how this can work? Do we need to add static route on upstream router for new subnet?

Regards,

13 REPLIES 13

L5 Sessionator

Keep that in mind :

nat.JPG.jpg

Hope help

V.

Gregoux, If I will put deny all at the bottom, Do we need to allow separate rules outside to outside, DMZ to DMZ and Inside to inside for all traffic.

Thanks a lot. I created the rules as mentioned in this snapshot.

Not applicable

Thanks a lot . The migration was successful.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!