Device showing not connected in Templates

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Device showing not connected in Templates




Cyber Elite
Cyber Elite

Thank you for the post @rameshkumarparathi 


This looks like general connectivity issue between Firewall and Panorama. Could you go to: Panorama > Managed Devices > Summary, then confirm status of this Firewall. If this Firewall is disconnected from Panorama, then this is not related to Template.


On Firewall side confirm that Panorama is registered under: Device > Setup > Management > Panorama Settings. Also make sure that Serial Number of the Firewall is the same as the one registered in Panorama. If there is no issue with these 2 settings, then I would move to connectivity troubleshoting:


Once connectivity is restored, you should be able to see connected status and use Firewall in Template Stack.

Kind Regards




Help the community: Like helpful comments and mark solutions.
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!