Hello, how are you all, I hope you are well.
I would like to do the following:
In Fortinet is the following possible, DNAT, with Public IP example:
220.127.116.11:8081 ( alternate port ) ---DNAT-Mapping---Private IP destination 192.168.100.100:80 ( Port 80)
This in PALO ALTO, how is it configured, please your support, thank you very much.
Greetings and I remain attentive
Please se below url for Destination NAT with Port translation
Dear, thank you, the example seems more similar to a UTURN-NAT:
In this case, what you are looking for is:
External 18.104.22.168:8081 ( alternate port ) ---DNAT-Mapping---Private IP destination 192.168.100.100:80 ( Port 80).
Externally answer port 8081 and the DNAT in the destination is a port other than the external one, in this case 80.
Another example: 22.214.171.124.100:33899 ( 33899 different port for RDP ), externally answer to 33899 and the DNAT, map it to 192.168.100.100:3389 ( RDP ).
@MP18 The procedure / information sent, only allows to do a NAT Portforwarding, to port 8080, since the port is chosen and is mapped to the server that responds on port 8080, but what I am looking for, so the examples, is the following ( This can be done in fortinet )
Is that a user X of internet, for example to place Remote Desktop client on port 126.96.36.199:33899 ( If an alternative one with a 9 of more, 33899 ) The public IP is mapped to a server 192.168.100.100 to the default port 3389.
Public IP: 188.8.131.52:33899 ---DNAT---Mapped 192.168.100.100:3389 ( RDP ).
Please read the previous post as well.
Thank you very much for your assistance
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!