dns-proxy static entry lost

Showing results for 
Show  only  | Search instead for 
Did you mean: 

dns-proxy static entry lost

L0 Member

I've got a PA-5050 running version 4.0.6.

I'm using the dns-proxy to resolve a single address from my wireless guest network access.  It works fine for days, then sometimes just stops working.

Under Network >> DNS Proxy the entry is listed and enabled, however; doing ' show dns-proxy static-entries all' shows the list as blank.

(active)> show dns-proxy static-entries all
Name: GuestStatic Entries:                                          Domain                                  IP/Name  Type Class        TTL         Hits-----------------------------------------------------------------------------------------------------------------------------

Any idea why this happens?  Is there an easy way to stop/start the DNS proxy piece?




L4 Transporter

Please could you open a Support case so as to allow a closer look on 4.0.6. Also, would you be able to upgrade to 4.0.7 to see if the dns-proxy entry shows up and behaves consistently?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!