DNS Sink Hole not working

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

DNS Sink Hole not working

L4 Transporter

8.0.4

 

I am trying to get SinkHole to work... Not having any luck,

 

using a dns from the release notes of 2520-3016

 

nslookup gefndb.com

 

returns the real address

 

All looks correct, just does not seem to work

 

-----------------------------------------------------

 


set rulebase security rules "Rule 1" from TRUST
set rulebase security rules "Rule 1" to UNTRUST
set rulebase security rules "Rule 1" source Domain_Controllers
set rulebase security rules "Rule 1" destination any
set rulebase security rules "Rule 1" source-user any
set rulebase security rules "Rule 1" application any
set rulebase security rules "Rule 1" service [ DNS ]
set rulebase security rules "Rule 1" hip-profiles any
set rulebase security rules "Rule 1" category any
set rulebase security rules "Rule 1" action allow
set rulebase security rules "Rule 1" log-end yes
set rulebase security rules "Rule 1" profile-setting profiles spyware My_default

set profiles spyware MY_default botnet-domains lists default-paloalto-dns action sinkhole
set profiles spyware MY_default botnet-domains sinkhole ipv4-address pan-sinkhole-default-ip
set profiles spyware MY_default botnet-domains sinkhole ipv6-address ::1

2 REPLIES 2

Cyber Elite
Cyber Elite

gefndb.com is no longer listed as malware I think, try this domain:

 

umekana.ru

 

> umekana.ru
Server:  b.resolvers.level3.net
Address:  4.2.2.2

Non-authoritative answer:
Name:    umekana.ru
Addresses:  ::1
          1.1.1.1

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

That one is not in my Installed or Latest download.

 

However, I was basing my attempts on the "Installed" AV version,   I picked one from the latest downloaded and that is sinkholed correctly.

 

Cheers

 

Rob

  • 1872 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!