Forticlient connecting but no traffic goes through

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Forticlient connecting but no traffic goes through

L1 Bithead



I am trying to use Forticlient to connect to a remote network outside our coporate network.


The connection is successfully established, it seems that the traffic is sent but no traffic gets received from the Forticlient.


Screen Shot 07-22-19 at 02.06 PM.PNG


Anything needs to be done on the PaloAlto to enable traffic reception?


Best regards


Cyber Elite
Cyber Elite


Check the logs to make sure no traffic is getting blocked for this. Also check to see if your PAN is decrypting the traffic. Might need a special policy to allow the application and/or bypass decryption.





I don't see any traffic being blocked in the logs... which I find weird.


The PAN is not configured to decrypt traffic so it's not related.



Are you logging traffic hitting the "Implicit Deny All Interzone" rule at the bottom of your ruleset?

Yes and I don't see anything related to my problem in that log, whether I filter by source IP or Destination IP.

  • 4 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!