global protect client - config refresh test and verify

[MP18]

Is there any way i can test and verify the config refresh  time in global protect client running 4.1.4?

[Mick_Ball]

how about setting the refresh rate to 1 hour and "allow user to disable GP" = disallow

connect via GP to get new app config.

leave device connected and then modify "allow user to disable GP" = allow

stay connected for 1 hour and see if you have the option to disable the client.

[MP18]

giving it a test

[Mick_Ball]

yeah me too... set it off justr after 3 so will update,,,, gonna check the logs also to see if it is mentioned in there...

[Mick_Ball]

cool.... disable option is now visible...

and the log says...   msgtype = refresh-configuration

and tunnel stayed connected.

[MP18]

for we it did not work

i end the process and killed the process

same thing

[MP18]

where u see this log

msgtype ?

[Mick_Ball]

from collected logs on the GP client.

[Mick_Ball]

pangps log

[Mick_Ball · Accepted solution]

(T4032) 11/02/18 01:53:29:201 Debug(7120): RefreshPortalConfig is yes, RefreshPortalConfigInterval is 1 hours

(T4032) 11/02/18 02:53:33:170 Info ( 438): msgtype = refresh-configuration

[MP18]

Thanks for helping me out.