Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
11-20-2013 05:54 AM
I have a firewall setup as a gateway/portal allowing users GlobalProtect client to prelogin and/or automatically log in when not on the corporate network. This is in the early testing stages and what I am noticing is the following. If I am on the internal network (determined by Internal Host Detection) and then switch to an external wireless connection, the GlobalProtect client does not update its status from internal to connected.....I know that I can do a rediscover network, but end users are not going to remember to do that, so I am asking if there is a way that the GlobalProtect client can auto update so it knows it is not internal anymore?! Any help would be greatly apprecaited.
Thanks,
Corey
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
