GlobalProtect with X-Auth split tunnelling

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

GlobalProtect with X-Auth split tunnelling

L0 Member

Hi guys,

I'm working on a GP portal and gateway configuration, in order to provide to the customer full compatibility with the old vpn clients (ex: cisco) I enabled X-Auth support on it.

 

The client with a third party software authenticates but it always gets a default route 0.0.0.0 and not the single networks specified in the GP Gateway-->Client Configuration-->Network Settings.

 

If I use the GP client it works withut issues.

 

What am I missing?

 

Thank you.

 

 

 

Dario

1 REPLY 1

L2 Linker

In some of the documentation for VPNC it describes the split-tunneling scenario, and that where it can see different routes/prefixes being injected by the GlobalProtect gateway, the client will summarise those with a 0.0.0.0/0 route.

  • 1702 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!