H323 Gatekeeper Question

L0 Member

H323 Gatekeeper Question

Hello everyone,


The agency I work for is experiencing H323 call drops. After some research I found documentation here that Palos do not support H323 signaling when a gatekeeper is in call routed mode. The gatekeeper is currently in call routed mode.


My question is, does this affect all versions of Palos or only certain versions?


Also, what would the behavior be? Would the calls not even setup? Or would they setup and get to the RTP session and then drop?


Thank you


Cyber Elite


I have seen issues with this in the past when threat inspection has been enbabled. Try disableing your AV and threat on that policy only and see if that makes any difference. Make sure your policy is specific with source and desitnation with proper applications first so you dont accidnetally open the policy up too much.


Hope that helps.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!