HA in AWS deployment error message

cancel
Showing results for 
Search instead for 
Did you mean: 

HA in AWS deployment error message

L0 Member

Greetings,

 

I am deploying a pair of VM Series Palo Alto's in AWS.  Pretty much have a handle on the set up for HA.  In AWS eth0 is the management interface and is provided by DHCP.  After setting up for HA and committing the config I get the following error:

 

  • High-availability ha1 can't be configured with port 'management' and have an IPv4 peer-ip without setting up a real IPv4 address for the 'management' port(Module: ha_agent)
  • Commit failed

I do not know how to set up a "real" IP for the management interface.  Any ideas?

 

Regards,

 

Gregman

2 REPLIES 2

L0 Member

This is the actual error message I snipped...

 

commit failure palo.PNG

You can check you real mgmt interface ip (not sure if it even exists with AWS deployment) using the following commands;

 

> show interface management

> show interface all

 

Best to check AWS HA deployment guide;

 

https://www.paloaltonetworks.com/documentation/70/virtualization/virtualization/set-up-the-vm-series...

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!