HA in VWire and path monitoring

cancel
Showing results for 
Search instead for 
Did you mean: 

HA in VWire and path monitoring

L4 Transporter

 

We have an environment (HA active passive in VWire mode) in which the PA is sitting directly connected to an SRX FW in HA.

 

What we agreed that both of the PA and the SRX should be:

 

  • Link up on the passive device
  • Disable failover on link down
  • Failove upon "ping" drop for certain IP

  

 

I would like to know what how is the mechanism works in VWire mode (the PA is managed only thought the Mgmt interface that is on out of band network)

 

On the GUI we should insert the VWire name ,source IP, destination IP.

 

 

My main questions are:

 

  1. Which IP should the source IP be?
  2. In case it is an IP in the "network segment" the VWire cut how the PA handles the ARP issue?  
1 REPLY 1

L7 Applicator

Related discussion on the same topic:

Path-Monitoring Virtual Wire

Re: HA path monitoring in virtual wire

virt

Hope this helps.

Thanks

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!