HA1 and HA2 Links

cancel
Showing results for 
Search instead for 
Did you mean: 

HA1 and HA2 Links

L1 Bithead

Hi Guys,

I have configured each of my HA links to have backup links. I would like to know, are the backup links also sending and receiving traffic like port-channel in which both ports are active? Especially the HA2 if we want to have 20G or more links for session sync.

Thanks

3 REPLIES 3

Cyber Elite
Cyber Elite

@Nikko,

You don't gain any additional bandwidth capacity by enabling backup interfaces, it's not like creating a port channel or aggregate interface. 

Hi @BPry , noted but is it possible to have an AE interface to be an HA1 or HA2 so that we can bundle up those ports to increase bandwidth and having backup links altogether like the capability of ASA of Cisco? Thanks

You can only use an aggregate interface as an HA3 link because this interface requires a lot of bandwidth. for either HA1 and HA2 you don't need a lot of bandwidth so aggregates make less sense since you can add a secondary interface as backup

Tom Piens
Like my answer? check out my book! https://bit.ly/MasteringPAN
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!