High Usage of Root Partition in PA-220 After upgradre to 10.1 version

cancel
Showing results for 
Search instead for 
Did you mean: 

High Usage of Root Partition in PA-220 After upgradre to 10.1 version

L3 Networker

Hi Team,

 

After upgradation of PAN-OS 10.1.x version we are facing High Root Partition issue in our firewall. 

 

Even after manually clean the logs after 5 days it is back to high, Is there any particular reason the partition usage is high ?

 

 

Snow
3 REPLIES 3

Cyber Elite
Cyber Elite

Hello,

Make sure you are running a recommend version:

https://live.paloaltonetworks.com/t5/customer-resources/support-pan-os-software-release-guidance/ta-...

Delete the older software packages in Device->Software.

Also check out this article on this topic:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaJCAS

Regards,

L0 Member

we are using PAN OS 10.1.3   ON PA-220 DEVICE

 

Root partition high usage  

 

/dev/root 3.8G 3.3G 303M 92% /
none 2.0G 60K 2.0G 1% /dev
/dev/mmcblk0p5 13G 5.1G 6.7G 43% /opt/pancfg
/dev/mmcblk0p6 3.8G 997M 2.6G 28% /opt/panrepo
tmpfs 2.0G 504M 1.5G 26% /dev/shm
cgroup_root 2.0G 0 2.0G 0% /cgroup
/dev/mmcblk0p8 3.7G 1.5G 2.1G 43% /opt/panlogs
/dev/loop0 111M 5.6M 100M 6% /opt/panlogs/wildfire/tmpfile

Cyber Elite
Cyber Elite

Hello,

I would recommend going to 10.1.6.

Regards,

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!