how configure a vlan with dhcp

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

how configure a vlan with dhcp

L1 Bithead

I have configured my vlan in different ways with subinterfaces however I connect my switch or my laptop to the port and it doesn't work.


steps i followed:
1. Create subinterfaces and assign a segment to it.
2. Add these subinterfaces to the virtual router.
3. add dhcp to the subinterfaces.
4. create firewall rule for internet outbound from zone and vlan segment.

It looks something like this: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClRkCAK


However, when I put it on my laptop, the vlan on the ethernet port does not work.

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

@Fipaterm,

Are you attempting to plug the laptop directly into the PAN device? Assuming that you are, you likely don't have the laptop configured for VLAN tagging and therefore what you have configured isn't going to work. You'll need to configure the device to tag traffic properly, or utilize a switch with a proper trunk configuration and break out the access ports as required on the switch.

 

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

@Fipaterm,

Are you attempting to plug the laptop directly into the PAN device? Assuming that you are, you likely don't have the laptop configured for VLAN tagging and therefore what you have configured isn't going to work. You'll need to configure the device to tag traffic properly, or utilize a switch with a proper trunk configuration and break out the access ports as required on the switch.

 

  • 1 accepted solution
  • 6404 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!