How do I setup dual ISPs on pa500 with ver 5.0.3 firmware

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

How do I setup dual ISPs on pa500 with ver 5.0.3 firmware

L0 Member

I need some clear documentation for how to setup a secondary internet connection to take over if primary fails. I know this is done with Policy Based Routing but that is about all I know. I found documentation on this but it was for firmware version 3 and it is different than what I am used to seeing.

1 REPLY 1

L7 Applicator

Hello Sir,

Please follow below mentioned documents.

https://live.paloaltonetworks.com/docs/DOC-1357

https://live.paloaltonetworks.com/docs/DOC-4500

https://live.paloaltonetworks.com/docs/DOC-1562

It will help you to setup dual ISP redundancy on PANFW. Above docs are valid for PANOS 3.1.1 and above.

Thanks

  • 1811 Views
  • 1 replies
  • 1 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!