how to check PAN performance after demo to customer

Showing results for 
Show  only  | Search instead for 
Did you mean: 

how to check PAN performance after demo to customer

L2 Linker


I would like to know how to check PAN performance after demo to customer. because I'm not sure if the device can support the load on customer site.

Thank you.


L5 Sessionator


When you say after the customer demo you want to check PAN performance. I am not sure what exactly you mean by that.

But you can use different test tools example spirent, breaking point etc etc with sending mix of traffic to check the performance and the load that can be handled by the device.

Also it would be a good idea to check with you Sales Engineer to provide you with the performance numbers on different devices.

Thank you



I means if I can check cpu load and memory statistics on tech-support file it would be good. but I don't know how to check it.

you can do that when the test is being runned with snmp (various counters there) - but dunno how to get the stats afterwards...

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!