05-28-2014 09:53 PM
How to Configure Dual VPNs with Dual ISPs from a Active Active Cluster to a Remote Site? Any reference document?
We want to connect first ISP to device 0 on the active/active cluster and connect another ISP to device 1.
Is it possible to do a link load balance with pbf ?
05-28-2014 10:09 PM
Below mentioned docs might help you.
How to Configure Symmetric Return
As per PBF, you can load share traffic based on address/application.
05-28-2014 11:52 PM
I have read these 3 docs but the docs only mention about a single device.
05-29-2014 08:53 AM
If you need to setup links to two separate firewalls then you will need to configure active active HA.
Here is a guide that explains the deployment scenarios
Configuring Active/Active HA PAN-OS 4.0
Please ensure that you are not trying to get double capacity by using Active Active because if you have a failure of a device a single device will not be able to hold the load of two firewalls.
Hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!