how to configure HA in PA VM-500 deployed in ESXi
cancel
Showing results for 
Search instead for 
Did you mean: 

how to configure HA in PA VM-500 deployed in ESXi

L3 Networker

How we can configure HA2 for PA-VM Active passive deployment in ESXi.

 

Can we use ip-address from mgmt network to use it for HA2 on both firewall.

eg. 1.1.1.1  - Active firewall mgmt ip

      1.1.1.2 - Passive firewall mgmt ip

      1.1.1.3 - HA2 ip addres for Active firewall

      1.1.1.4 - HA2 ip address for Passive firewall

or do we require to take different subnet for HA2 synchronization ?

 

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

@Deepak_K,

You'll need to configure HA2 on a data plane interface by switching the interface to HA. You can utilize your MGMT VLAN if you want; as long as the peers can communicate to each other it doesn't really matter what you utilize for HA2.

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

@Deepak_K,

You'll need to configure HA2 on a data plane interface by switching the interface to HA. You can utilize your MGMT VLAN if you want; as long as the peers can communicate to each other it doesn't really matter what you utilize for HA2.

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!