How to QOS Cisco Phones?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

How to QOS Cisco Phones?

Not applicable

Architecture:

Hub and Spoke, Site to Site Ipsec VPN tunnel

HQ Site:

ASA5520

Call Manager

Cisco IP Phones

Remote:

PA5020

No Call Manager

Cisco IP Phones

Remote users connect to HQ via VPN tunnel between ASA and PA

QOS Policy

src.zone Inside dst.zone Inside to match traffic over the tunnel

apps

rtcp, rtp and sccp

This is working pretty well.  Any further advice is welcome.

3 REPLIES 3

L6 Presenter

Make sure you have prioritize all apps use by the phones.  You can run a report for src=IP of a phone and review all the apps/traffic generated by the phone.  If there's any unknown traffic from the phone, you may want to classify the unknown and add it to the QoS policy.  Thanks.

Also dont forget to prioritize in both directions.

If I recall correctly the QoS is always setup on the outbound (egress) interface.

  • 3028 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!