How to show connected remote users with Panaroma

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

How to show connected remote users with Panaroma

L0 Member

Hello

directly at gateway you can show connected globalprotect users. Network - GlobalProtrect - Gateways - Info - Remote Users

With Panorama you don't see the information about remote users.

 

By the way - max user is in both views empty

 

Using Panorama 10.1.7

 

Any idea how to see remote users with panorama?

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

Hi @kuschg ,

Unfortunately I am afraid the only possible way would be to switch the view context

Astardzhiev_0-1664488256132.png

But this is basically "proxying" the connection to the firewall via Panorama.

 

Unfortunately such information is not available to the Panorama. Similarly you cannot see the firewall session table from Panorama.

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @kuschg ,

Unfortunately I am afraid the only possible way would be to switch the view context

Astardzhiev_0-1664488256132.png

But this is basically "proxying" the connection to the firewall via Panorama.

 

Unfortunately such information is not available to the Panorama. Similarly you cannot see the firewall session table from Panorama.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!