I don't know how to set zone protection

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

I don't know how to set zone protection

L3 Networker

Hi~

I have a question,,

We know that,,,

Paloalto appliance is not primary dos soultion

so one support some dos feature (TCP Flood, UDP Flood, ICMP 0 Packet someting like that etc,,)

I had poc from customer site

I set zone protection between Tap Zone and Tap zone

customer asked me;;

why is palaalto do not represent about source ip and dst ip,,,

also I don't know too until now,,,

That mean is that Monitor  - Threat

There are many Threat Traffic

but,, only TCP Flood was not Attacker and Vicitim IP Address

just represent 0.0.0.0

0.0.0.0

how come,,,~

Tell me the reaseon?

Customer is very curious;;

and so

If I set Policy Dos Protection

should monitoring threat is represent 0.0.0.0?

That it

bye

1 ACCEPTED SOLUTION

Accepted Solutions

page15

In addition, I'll let you know how to use Adobe PDF Reader.

Adobe Reader X * Save, view, and search PDFs

If you are using other PDF Reader, please google it by yourself.

People was discussing about same topic in the following thread.

I recommend you to read this thread too.

View solution in original post

4 REPLIES 4

L6 Presenter

where can I find 0.0.0.0?

page15

In addition, I'll let you know how to use Adobe PDF Reader.

Adobe Reader X * Save, view, and search PDFs

If you are using other PDF Reader, please google it by yourself.

People was discussing about same topic in the following thread.

I recommend you to read this thread too.

Thank you~!

First, I will check how to attack way,, T-T

It is hard to study

and If I configured Dos Profile(Policy - Dos Protection) Can I see ip address

because,,, Soure Zone, Address | Dst Zone, Address could be configured by Dos Protection

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!