In HA, Pasive firewall sent the traps and CACTI shows data, Active send nothing

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

In HA, Pasive firewall sent the traps and CACTI shows data, Active send nothing

L4 Transporter

Hello everybody

I have 2 PA-2050 with PanOS 4.0.11 configured with HA. The traps are sent by the Pasive Firewall not the Active, also source IP of the trap belongs to Pasive not by the shared management IP.I just checked the managemtn Profile and SNMP its available.

Moreover, I have a CACTI server, the graphs of the Pasive firewall works fine but Active shows nothing.

Any idea what is wrong?

Best Regards

Gonzalo

1 REPLY 1

L6 Presenter

Verify so the ip of mgmt interface is different on both boxes...

  • 1629 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!