Internet traffic stop and start by clearing the arp

cancel
Showing results for 
Search instead for 
Did you mean: 

Internet traffic stop and start by clearing the arp

L4 Transporter

I am facing an issue in PA that internet outbound and inbound traffic suddenly stop sometime then I am clear the ARP of untrust interface its work again for some time.

 

Its repeat 4 to 5 time in a day...

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

@Mohammed_Yasin,

How is the firewall setup to get an IP address on the Untrust interface and what is it actually plugged into to get that internet connection? Sounds like it's possibly DHCP or PPoE and something is set incorrectly. 

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

@Mohammed_Yasin,

How is the firewall setup to get an IP address on the Untrust interface and what is it actually plugged into to get that internet connection? Sounds like it's possibly DHCP or PPoE and something is set incorrectly. 

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!