- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
05-09-2017 09:25 AM - edited 05-09-2017 09:26 AM
Do the proxy ID's on the pan side have to match the ACL defined crypto domain on the ASA? That is - suppose on the PAN side you had for phase II of the tunnel 192.168.1.0, 192.168.2.0 and 192.168.3.0 while the ASA side had only 192.168.1.0 and 192.168.2.0. Would phase II tunnel still come and allow traffic for the first two subnets? Or would both sides need to match precisely in order for phase 2 to successfully come up at all? Thank you.
05-09-2017 10:02 AM
I think l had a similar case some time ago. Where customer added an additional subnet on one side but forgot to configure a proxy id. This was bringing a tunnel down. So yes proxy id`s have to match, otherwise, the tunnel will be coming up/down (flapping). I always imagine a proxy id`s as a additional authentication keys then should match on the both sides.
05-09-2017 10:09 AM
@TranceforLife If you expect Proxy ID to give additional security then avoid using aggressive mode and stick to main... 🙂
05-09-2017 10:59 AM
Well it's not so much that I want extra security. I need to migrate the tunnel to a new data center and in the process we found defunct subnets, overlapping subnets etc etc. So I tried to clean up as best possible. But I was trying to determine if me and the partner are not entirely in-sync if the tunnel would still come up. Tunnel turn-up is always a nightmare. 🙂
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!