10-28-2016 01:06 PM
Hello Experts
Is there any option to initiate a IPSEC VPN without passing actual traffic. Like in Juniper SRX, there is option "establish-immediately" or in Juniper Netscreen "rekey" option
Regards,
GR
10-28-2016 01:55 PM
The commands
test vpn ike-sa gateway [name]
test vpn ipsec-sa tunnel [name]
will bring up the tunnel without having anything on the other end pass network traffic if that is what you are looking for. If you want this to happen automatically you would likely need to script it with the api.
10-28-2016 01:55 PM
The commands
test vpn ike-sa gateway [name]
test vpn ipsec-sa tunnel [name]
will bring up the tunnel without having anything on the other end pass network traffic if that is what you are looking for. If you want this to happen automatically you would likely need to script it with the api.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
