IPSec VPN tunnel question, Proxy-ID and peer IP same?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

IPSec VPN tunnel question, Proxy-ID and peer IP same?

L0 Member

I am creating a static routing IPSec VPN tunnel with a 3rd party.  The 3rd party wishes to NAT their hosts to their peer IP, which means the remote peer IP will be the same as the proxy-ID IP.  How do I support this?

3 REPLIES 3

L2 Linker

are you able to not use proxy-IDs (does the remote support route-based vpn or do they only do policy based vpn?)

 

if you are able to not use proxy-ID, NAT inside the tunnel should work if you delimit the source/destination zones and networks in the NAT policy

L0 Member

Was this ever figured out... I'm in a similar circumstance.

Cyber Elite
Cyber Elite

Hello,

The proxy ID's are only for the networks behind the firewall not the IP of the firewall itself. 

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClE6CAK

 

Hope this helps.

  • 2821 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!