Knowledge sharing: restarting palo alto processes , reboot , shutdown, factory default reset

cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge sharing: restarting palo alto processes , reboot , shutdown, factory default reset

Cyber Elite
Cyber Elite

In palo alto like any some things are fixed with an restart.

 

1. If the managment plane in the masterd log (for more about the Palo Alto logs and their meaning you can check https://live.paloaltonetworks.com/t5/general-topics/knowledge-sharing-palo-alto-general-logs-and-log...) you see there are issues with a process or by using the commands "show system resources" or "show system software status" you a process down the this process can restarted/started ( debug software restart process xxxx ). For example with gui issue the web process is restarted and if it does not help then the managment server process is restarted. less mp-log masterd.log

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CljKCAS

 

https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-cli-quick-start/cli-cheat-sheets/cli-cheat-sheet...

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaGCAS

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000POIHCA4

 

 

 


2. Also the interfaces can be shutdown and enabled if there is an interface issue:


https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClZQCA0

 

 

 

 


3. If this does not help and issues with processing client production traffic then on some devices then you can request only the data plane to be restarted. If this still does not solve the issues then a reboot or even shutdown (system halt) could be needed.


request datapane restart/request chassis restart slot

request system restart

request system shutdown

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaZCAS


https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-web-interface-help/device/device-setup-operation...


https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/administer-panorama/reboot-or-shut-dow...

 

 

 

4.If the issue can't be discovered don't forget the ultimate solution for non hardware palo alto issues is saving the config to external storage then factory default reset of the firewall and again importing the the config (the TAC does this many times).

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CldXCAS


https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/firewall-administration/reset-the-firewall...


https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClRcCAK

1 REPLY 1

Cyber Elite
Cyber Elite

Great Article Nikolay!

MP
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!