L3 and MGT IF Routing

[asapcomsupport]

Hello,

just configured a L3 IF and a MGT IF on a PA-2050 with identical IP-Subnets but with different default gateways (the one for the MGT IF configured in the setup section and the one for the L3 in the default vrouter).

My question is: Is this allowed (Same subnet MGT and L3) with different default gateways or can this cause some routing problems?

Any answers welcome.

Stefan

[reaper]

Hi Stefan

The mgmt interface sits in a different routing entity than the other interfaces, so you are allowed to put them in the same subnet and have them point to different default gateways

regards

Tom

[asapcomsupport]

Hi Tom,

this is what I think abaout that. Perhaps there is a Bug which causes some strange Routing behaviour, becauss some Packets are send to the MGT IF default router and not directly to the attached network. This seems to make a Loop.

I have to analyze the problem again and perhaps open a case.

Thanks so far.

Stefan