LLDP not showing neighbors

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

LLDP not showing neighbors

L4 Transporter

We have LLDP enabled on AE1 (x2 40G) which is on a QNPC on a HA A/P 7050 cluster running 7.0.2

The N7K is seeing the LLDP information and traffic, however the 7050's are not. Trying to see if anyone else has had success with LLDP on this?

 

Interface          Total-Tx      Dropped     Total-Rx     Dropped-TLV    Errors    Unrecognized    Aged-Out
----------------------------------------------------------------------------------------------------------------------------------------
ethernet1/13      317               0                  0                      0                0                    0                       0
ethernet1/14      317               0                  0                      0                0                    0                       0

 

admin@7050 (active) show lldp neighbors all

Local information:
Index 76
Local interface: ethernet1/13

 

hdc-n77k-1-dc-1# sh lldp traffic interface ethernet 2/3

LLDP interface traffic statistics:

 

    Total frames transmitted: 20277

    Total entries aged: 1

    Total frames received: 166

    Total frames received in error: 0

    Total frames discarded: 0

    Total unrecognized TLVs: 0

hdc-n77k-1-dc-1# sh lldp traffic interface ethernet 2/3

LLDP interface traffic statistics:

 

    Total frames transmitted: 20278

    Total entries aged: 1

    Total frames received: 167

    Total frames received in error: 0

    Total frames discarded: 0

    Total unrecognized TLVs: 0


Local Port ID: 61
Neighbor information:

Local information:
Index 77
Local interface: ethernet1/14
Local Port ID: 62
Neighbor information:

1 REPLY 1

L4 Transporter

UPDATE: I have a TAC case open that has been in research status for the last 2-3 weeks. I have determined that this is either an issue with the Cisco N7K or the PA-7050. We have successfully establish LLDP with a CIsco 6513 and a PA-5060 cluster on PAN-OS-7.0.3. Will update once I hear back from TAC.

  • 2564 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!