PA7080 Bonded Mgmt interfaces failover issue

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA7080 Bonded Mgmt interfaces failover issue

I am having an issue with a pa7080 connecting to an ex4300

Port map: PA7080 >>> EX4300
Mgmt A=Eth0/1<===>ge-1/0/1 Up/Up (MAC table entry)
Mgmt B=Eth0/2<===>ge-1/0/2 Up/Up (No MAC table entry)


Both interfaces show as UP/UP but only one is passing traffic and reporting a MAC. I sort of (assuming) expect that as they are bonded. 

Interfaces have LLDP enabled- but don't show in neighbors list.

When I down ge-1/0/1 and Mgmt A goes offline- Mgmt B doesn't change state. No traffic passes and no MAC entry for ge-1/0/2. 

We've tried a lot of things on the EX4300 side, making them trunks, access ports, LAG them with and without LACP but nothing seems to work. 

Any help would be greatly appreciated

0 REPLIES 0
  • 303 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!