11-18-2018 01:05 PM
Hi,
I've configured all the necessary in my PA-500 but I can't view logs Kiwi Syslog v8 in my PC. Is there some special configuration I missed? I've configured the firewall for UDP sessions. I've some DMZ configured, maybe I forgot to open some ports?
11-19-2018 07:05 AM
Do you have Kiwi workign for other logs?
Is Kiwi listening on UDP or TCP?
Can you ping the kiwi box from the firewall management address??
11-19-2018 09:16 AM
Hi,
kiwi is listening in UDP port. I have no other log active. I can ping only the managment interface but not other IPs with the command "ping host x.x.x.x"
11-19-2018 09:31 AM
Hi,
with the command "ping source <mgmt_address> host x.x.x.x" I have the correct response.
11-19-2018 10:35 AM
So a few things to think about:
1) Does the firewall see the syslog traffic in the logs (enable logging on the default logs temporarily) and does it actually state it's being allowed.
2) Do you actually have the log-setting setup correctly or the log-forwarding profiles setup correctly.
10-22-2019 03:55 AM
Hi,
about the logs firewall. Is there a feature to activate to view in monitor these specific activities?
I see nothing in monitor -> logs -> traffic.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
