Management profile setup on the outside interface for remote management, Panorama not communicating.

cancel
Showing results for 
Search instead for 
Did you mean: 

Management profile setup on the outside interface for remote management, Panorama not communicating.

L1 Bithead

I have a management profile setup on my outside interface at a VPN site for remote management.

I have my in-band management port settings set to blank fields.  Panorama doesn't establish communication with this firewall.

I am wondering if it is because the management ip information is blank, or do I need to configure something else to allow Panorama to communicate with this device?

Thanks,

Mike

2 REPLIES 2

L7 Applicator

did you setup the service route for management access on the selected port.

Setting a Service Route for Services to Use a Dataplane Interface from the Web UI and CLI

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

I was just watching the PA firewall configuration essentials videos.

It looks like I have to change this under the Service Route Configuration.

Device > Setup > Services and select Panorama and select my management ip.

Thanks,

Mike

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!